The Virtue Invert Mini Laser eyes are very easy to
install and will help you to see if your eye sensors are
dirty or clean from paint and debris.
Virtue Invert Mini Laser Eyes Function
Laser Eyes use dual spectrum technology to scan the
infrared and visible light spectrums.
Virtue Invert Mini Laser Eyes Performance Benefit
The Laser Eye emitter actually draws up to 45% less power
than the stock eyes. Virtue Laser Eyes are more battery
efficient and also increases performance, especially when
your battery is not completely fresh.
Virtue Invert Mini Laser Eyes Reliability
Virtue Laser Eyes are so reliable we confidently back them
with a lifetime warranty. In the unlikely event they do
fail as a result of a defect, Virtue will replace.
Additionally many gun techs have come to rely on Laser
Eyes when diagnosing down guns. If the Laser Eye Emitter
is on and working you know the eyes are working!
Features
Virtue Inver Mini Laser Eyes feature a Hall Effect
trigger sensor
Virtue Inver Mini Laser Eyes Enhanced eye operation
Increased battery efficiency
Virtue Inver Mini Laser Eyes Improved reliability
Dual spectrum technology: Infrared and visible light
NDZ MINI replacement
velocity back caps add some bling. With little aftermarket parts, one
mini looks pretty much just like the other. Replace your stock
damaged or worn cap with a fresh one.
custom spinner design
take the old one out,
new one in. Its that easy.
COLOR
Our
Price;
$20.95 IN STOCK!
CP SLING TRIGGER
Unmatched speed and reliability. Roller bearings provide that smooth
consistency every player is looking for. Increase your firing rate and
start making a difference for your team today.
COLOR
Our
Price;
$34.95 IN STOCK!
CP RAKE TRIGGER
Unmatched speed and reliability. Roller bearings provide that smooth
consistency every player is looking for. Increase your firing rate and
start making a difference for your team today.
COLOR
Our
Price;
$34.95 IN STOCK!
BPP MINI GRIPS
Boss
Grips for your Mini.
MINI TADAO BOARD
Tadao's hot software now available for your
Invert Mini!
Fully functional in the Empire Invert Mini
Based on the Musashi 7 software
New model microcontroller runs at 8 Mhz for no hardware lag and the
fastest code execution
Enhanced power switching hardware for the solenoid
Includes 12 fire modes:
*uncapped semi-auto
*capped semi-auto
*PSP auto-response
*PSP 50% ramping
*PSP 100% ramping
*PSP burst
*NXL full-automatic
*auto-response
*50% ramping
*100% ramping
*3 round burst
*full-automatic
Aynchronously monitors the trigger switch, using an interrupt based scan
at 2 million times per second
G mode setting allows 3 different options for every fire mode, giving 36
different ?breakout? style modes
Adjustable ABS programming prevents first shot drop-off
AMB (anti-mechanical bounce) and CPF (cycle percentage filter) algorithms
help to eliminate mechanical bounce and switch bounce
Power efficient software and hardware lengthens battery life
Programming mode allows changes to debounce, dwell, loader delay, AMB, ABS
dwell, fire mode, fire mode max rate of fire, eye mode, CPF, ramp start, G
mode, bolt delay, and training mode dwell
All settings are stored in non-volatile memory so they are not lost when
battery is disconnected
One-touch startup enables the marker to fire instantly
Automatic 15-minute idle power down saves batteries
4 eye modes: delayed, forced with force shot, test mode with rate of fire
indicator, and reduced dwell training mode with rate of fire indicator
Low battery indicator hardware and software shows battery level each time
the marker is turned on
MINI VIRTUE BOARD
Key Features
Two new modes! Select-A-Mode & Training Mode
Compatible with the Mini.
Simple trigger programming
9 fully adjustable base modes, w/ thousands of ramp modes
Adjustable dwell, closing dwell, eye sensitivity, anti-bolt stick &
more
Adjustable Ramp Activation Speed and Ramp Percentage
Low battery indicator and power efficient software
Forced shot
Brighter multicolor LED
Instant on with power saving 10 minute idle auto shutoff
Lifetime warranty & lifetime software upgrades
MINI O-RING KIT
Features:
1 #24 BOLT TIP
2 #25 LRG BOLT GUIDE O-RING
3 #28 SM BOLT GUIDE O-RING
3 #30 BOLT GUIDE O-RING
1 #35 POPPET O-RING
1 #32 BOLT GUIDE CAP O-RING
1 #17 SOLENOID OUTER O-RING
1 #16 SOLENOID INNER O-RING
1 #47 AIR TRANSFER TUBE TOP MALE O-RING
1 #48 AIR TRANSFER TUBE BOTTOM MALE O-RING
1 # 50 AIR TRANSFER TUBE FEMALE BOTTOM O-RING
MINI TEAM PARTS KIT
Features:
5 Bottom Section (Air Transfer Tube) O-rings
2 Regulator OPP complete
2 Regulator pin valve opener
2 Regulator filter
2 Regulator adj screw
3 feed collar
15 Top Section (Air Transfer Tube) O-rings
5 Air transfer tube o-ring female bottom
10 Poppet Urathane O-rings
5 Bolt Guide cap O-rings
12 Bolt guide o-ring small front
16 Bolt guide o-ring large
5 Solenoid Internal O-ring
5 Bolt Tip O-ring
2 Bolt complete w/o-rings
2 Main spring
10 Check Valves
4 Poppet
4 Battery Wiring Harness
5 Air Transfer Plate Manifold Gasket
5 Solenoid Front O-rings
5 Solenoid Outer O-rings
2 Solenoid piston
6 Solenoid screw
10 Front Cap Locking Screws
10 Complete Detent Assemblies
6 Grip Cover Screws
5 Rear Grip Frame Mounting Screw
5 Front Grip Frame Mounting Screw
5 Trigger set screw short
5 Trigger set screw long
5 Trigger set screw w/magnet
2 Trigger Mounting Pin
6 Regulator mount screw
5 Feedneck screw
10 Foregrip Screws
10 Foregrip rail retention screw
20 Air Transfer Plate Screws
MINI PLAYER PARTS KIT
Features:
2 Bottom Section (Air Transfer Tube) O-rings
4 Top Section (Air Transfer Tube) O-rings
2 Poppet Urathane O-rings
4 Bolt Guide O-rings
2 Solenoid Internal O-rings
1 Bolt Tip O-ring
3 Check Valves
1 Poppet
1 Battery Wiring Harness
1 Air Transfer Plate Manifold Gasket
2 Solenoid Front O-rings
2 Solenoid Outer O-rings
2 Bolt O-rings
2 Front Cap Locking Screws
2 Complete Detent Assemblies
2 Grip Cover Screws
1 Rear Grip Frame Mounting Screw
1 Front Grip Frame Mounting Screw
2 Post Travel Adjustment Screws
3 HES Adjustment Screws
1 Trigger Mounting Pin
2 Rail Locking Screws
1 Locking Lever Screw
4 Air Transfer Plate Screws
2 Main Circuit Board Attachment Screws
2 Fore Grip Set Screws
EMPIRE MINI CLAMPING
FEEDNECK
Clamping feed neck that will fit the Invert Mini.
COLOR
Our
Price;
$28.95 IN STOCK!
SHOCKTECH MINI CLAMPING
FEEDNECK
Ultra fast, ultra smooth, quick lever. All aircraft quality, 6061
aluminum with a machined Delrin back stop, for the lever action camloc.
Get it close with the adjustment knob then flip the lever into place. It
doesn't get a lot easier or faster than that.
Need to remove your hopper? Flip it open, the lever will remain in place
so all you've got to do is push it closed, not fumble around trying to get
it lined up.
Built strong, built to last, 100% made in America/Guaranteed for life.
